Chimney Rebuild in Morton Grove, IL
Professional chimney rebuild for Morton Grove homeowners. Registered, insured, and same-day scheduling available.
Chimney Rebuild in Morton Grove: What You Need to Know
GEM Chimney & Duct provides professional chimney rebuild in Morton Grove, IL. Morton Grove is a dense older suburb with many 1940s–60s brick bungalows featuring original masonry chimneys that are now 60–80 years old. Tuckpointing and chimney crown repair are among the most common services we perform here, given the age of the housing stock. The bungalow design means many chimneys are tall and exposed, and we regularly find crowns that have completely failed — allowing water to saturate the masonry and cause interior damage that the homeowner didn't connect to the chimney.
About Chimney Rebuild
A chimney rebuild involves dismantling the deteriorated masonry and reconstructing it with new brick and mortar. A partial rebuild (above the roofline) addresses the most weather-exposed section of the chimney — the portion most vulnerable to freeze-thaw damage. A full rebuild starts at the firebox and reconstructs the entire chimney structure. Both include a new crown, new flashing, and a new chimney cap as part of the completed system.
When a chimney has deteriorated to the point where the brick itself is spalling, crumbling, or structurally unsound, tuckpointing and spot repair are no longer sufficient. Continuing to use a structurally compromised chimney is a safety risk — both from the fire hazard of a compromised liner and the physical hazard of falling masonry. A rebuild restores the chimney to full structural integrity and resets the clock on its service life.
Signs You Need It
- Spalling brick — brick faces flaking, crumbling, or falling off
- Loose or falling bricks, especially near the top of the chimney
- Leaning or tilting chimney stack visible from the ground
- Large sections of missing mortar — gaps between bricks you can see from the ground
- Failed chimney inspection citing structural instability or unsafe condition
- Bricks or mortar debris found on the roof after wind or rain
- Chimney that has experienced a chimney fire
- Water damage so extensive that the masonry core is saturated
Our Process in Morton Grove
Structural assessment
We inspect the chimney from the ground and rooftop to determine the extent of deterioration and whether a partial rebuild (above the roofline) or full rebuild is required.
Brick matching
We source brick that matches your existing chimney as closely as possible in color, texture, and size — so the rebuilt section blends with the original.
Demolition and preparation
We carefully dismantle the deteriorated masonry, removing all loose and damaged brick and mortar down to sound material.
Rebuild
We reconstruct the chimney with new brick and mortar, maintaining proper coursing, joint profiles, and structural integrity throughout.
Crown, flashing, and cap
We install a new poured concrete crown, new step and counter flashing at the roof junction, and a new stainless steel chimney cap to complete the weathertight system.
Final inspection and documentation
We inspect the completed rebuild, document the work with photos, and provide a written report. We also inspect the liner and recommend any additional work needed.
Typical Pricing in Morton Grove
Upfront pricing — written estimate before any work begins.
| Service | Typical Range |
|---|---|
| Partial rebuild above roofline (1–2 ft) | $1,500–$3,500 |
| Partial rebuild above roofline (3–5 ft) | $3,000–$6,000 |
| Full chimney rebuild (1-story) | $4,000–$8,000 |
| Full chimney rebuild (2-story) | $6,000–$15,000+ |
| New crown + flashing (included in rebuild) | Included |
Why Morton Grove Homeowners Trust GEM
Schedule Chimney Rebuild in Morton Grove
Same-day scheduling available — takes 30 seconds.